1 for 1 Replacement of 400 Watt Metal Halide with Watt-Hawk 8ft Industrial T8 Fixtures. Saving 236 Watts Per Fixture!
Machine Shed / Barn Lighting
What are your biggest worries with your current lighting system in your Machine Shed? Is it the old incandescent lamps that are drawing 200 or 300 watts and not giving you any down light? Or is it the old fluorescent fixtures that swirl on cold mornings and cast yellow shadows? Some of you may have the bell fixtures that have hot spots underneath them and shadows in between.
With Vi-Tek 93® Plus lamps you can bring the natural outdoor full spectrum light inside your machine shed. Making it easier to work on projects while working indoors.
Unlike fluorescent fixtures of old, H&H fixtures and retrofit kits feature a ballasts that starts at -20° F so the will work on the cold winter mornings just like traditional fluorescents. Plus with their specially engineered reflectors to even disperse the light H&H fixtures and retrofit kits can be a great improvement to your machine shed.
If you are looking for the proper lighting for a new construction project make sure you check out the Watt Hawk fixtures. They will give you the best lighting system available. You can even call for layout suggestions.
If you already have fluorescent fixtures in you ceiling the easiest way to upgrade your machine shed lighting is to replace the fluorescent tubes to full spectrum Vi-Tek 93 Plus lamps. This will give you instant see ability.
Read More About Our Fluorescent Tube Replacement
The most cost effective way to upgrade an 8 foot strip fixture is with a retrofit kit. Remove the old lamps, socket bars, channel cover and ballast. Install the new prewired ballast and socket bars, reflectors, and Vi-Tek 93® + lamps and you will have better light while using less energy. This allows you to change to a more modern technology with good light levels and more energy efficiency.
Read More About Our 8 Foot T12 Strip Fixture Retrofit
The highly efficient reflectors in the our 6 lamp 8 foot T8 fixture will evenly distribute the full spectrum light from the Vi-Tek 93® + lamps. Plus the high ballast factor ballast produces more light using less energy than T12 fixtures and with its -20° start you will not have the swirling lamp effect on cold winter mornings. It is the easiest way to get more light covering more area. This allows you to minimize the amount of shadowing that you have when working on machinery.
Read More About Our Watt-Hawk™ Fixture Upgrade
A shop light throws out light in every direction. The H&H Workbench Fixture has a reflector designed to throw the light down on your working area where you want it. With the greater light output and more directed light it allows you to do the detailed work on your bench and even find your tools.
Read More About Our Workbench Fixture
Our Vapor-Hawk™ fixture is a durable vapor proof fixture with an impact resistant polycarbonate lens that will not become cloudy with age. Plus the Our Vapor-Hawk™ fixture features stainless steel clasps that so they don't become brittle and break like plastic clasps. When you combine the Vapor-Hawk™ fixture with our Vi-Tek 93® Plus lamps you get a reliable and economical way to light up your shop.
Read More About Our Vapor Proof Fixtures
CFL's last far longer than traditional incandescent bulbs so you spend less time looking for a replacement bulb when you replace the incandescent inside your trouble lights and clamp lights with A-Shape Vi-Tek 93® + CFLs. Plus you get the same high quality of light that you would have with your upgraded fixture lighting which allows you to see better in the darkened areas under hoods and machinery.
Read More About Our CFL for Trouble and Clamp Lights
Copyright 2013 © H&H Industries, Inc.