Reduce-A-Watt™ III Retrofit
Convert a 2 U6 Lamp 2x2 Layin Fixture
To 2 F17T8 Vi-Tek 93® Plus T8 lamps
Up to 56% Savings vs 2x2 UBend Fixtures
| Lamps | Watts | Kit | Savings | |||
|---|---|---|---|---|---|---|
| 2 F40T12U6 | 84 | 37 | 47 Watts | |||
| 2 F34T12U6 | 72 | 37 | 35 Watts | |||
| 2 F32T8U6 | 59 | 37 | 22 Watts |
Manufactured from US Steel and Assembled in USA
Quality of Light
- Unsurpassed Lamp Imaging
- 95% Specular Reflector
- 8 Mirrored Angles Per Lamp
- Even Lighting Pattern Eliminates Shadows and Hot Spots
Energy Efficient
- Consumes 37 Watts
- Could Save as Much as 47 Watts Per Fixture
Starting Features
- -20 Degree Fahrenheit Start
Ease of Installation
- Universal Voltage 120-277 Volt
- 480 Volt is Available
- Prewired Sockets
- You Do Not Have to Replace the Whole Fixture
- NEMA Ballast Disconnect
Warranty
- Ballast is 5 Years
- Lamps are 2 Years
Socket Bars: 0.032" pre-painted cold-rolled steel. Prepunched for lampholders and wire passageway. Tabs on socket bars securely mount the reflector in the correct position relative to the lamps.
Reflector: The enhanced aluminum reflector has a 95% reflective finish. The substrate is 0.020" high quality aluminum. The reflector profile is optimized to 13 angles using computer analysis and manufactured using state of the art CNC equipment. A protective premask is applied to all reflective surfaces prior to manufacture.
Installation: For retrofit, the existing ballast and socket bars are removed. With the new ballast installed, the socket bars are centered at the ends of the fixture and fastened with two self-tapping screws. The reflector is positioned between the socket bars. By applying slight compression to the reflector peak, the tabs on the socket bar are aligned with the punchouts in the reflector. When the compression is released, the tabs are securely hold the reflector in place.
Phone: 309-742-8674 Toll Free: 800-637-3853 Fax: 309-742-7071 Contact Us
ToolsByHH Movie-Tone
© H&H Industries, Inc. 2010