RAB 30/40/50W 3500K-5000K 2X4 LED Flat Panel with Sensor

Product Description

RAB 2ft X 4ft selectable wattage (30/40/50 watts) and selectable color temperature (3500K/4000K/5000K) backlit LED flat panel with occupancy sensor.

 

Product Features

Selectable Wattage

Power selection switch allows selecting between 50W/40W/30W (factory default 40W).

Selectable Color Temperature

Color selection switch allows selecting between 3500K, 4000K and 5000K.

Damp Location Rated

Suitable for damp locations.

Environmentally Friendly

Mercury and UV free. RoHS-compliant components.

Mounting

Recessed into T-grid ceiling. Surface and recessed mounting kits available for drywall ceilings.

DLC Listed

This product is on the Design Lights Consortium (DLC) Qualified Products List and is eligible for rebates from DLC Member Utilities.
Designed to meet DLC 5.1 requirements.
DLC Product Code: S-4LATM2.

IESNA LM-79 & LM-80 Testing

This luminaire has been tested by an independent laboratory in accordance with IESNA LM-79 and LM-80.

Chicago (CCEA) Plenum Compliant

Luminaire requirements used in Environmental Air Space per the electrical code specification of the city of Chicago.

Remote Control Compatible

Sensor and dimming settings can be adjusted using optional remote control.
(Item: MVSREM, Sold Separately).

 

Specifications

Fixture Type	Backlit Flat Panel
Installation Type	Drop ceiling installation (T-Bar Grid)
Installation Kits Available	Surface Mount Frame Kit
Technology	LED
Occupancy Sensor	Yes - Microwave Sensor
Sensor Detection Angle	About 30 to 150 degrees
Housing Material	Plastic Frame Galvanized Steel Back Housing
Finish	White
Lens	Frosted polystyrene
Equivalent	(3) F32T8 (3) F28T5
Watts	30 / 40 / 50W
Lumens	3,833 - 6,027 Lumens
Efficacy	120.3 - 139 Lm/W
Color Temp	Adjustable 3500K / 4000K / 5000K
Color Accuracy	81-84 CRI
Length	47-3/4"
Width	23-7/8"
Height	1-3/8"
Weight	10 lbs
Input Voltage	120-277V AC
Operating Frequency	50/60 Hz
Driver	Type: Constant Current, Class 2 30W: 120V: 0.25A, 208V: 0.15A, 240V: 0.13A, 277V: 0.11A 40W: 120V: 0.34A, 208V: 0.20A, 240V: 0.17A, 277V: 0.15A 50W: 120V: 0.42A, 208V: 0.25A, 240V: 0.21A, 277V: 0.18A
Dimming Driver	Driver includes dimming control wiring for 0-10V dimming systems. Requires separate 0-10V DC dimming circuit. Dims down to 10%.
Power Factor	99.32% at 120V 95.1% at 277V
THD	7.89% at 120V 6.23% at 277V
Sensor Capacitance Load	400VA at 120V AC 800VA at 230V AC 1000VA at 277V AC
Sensor Daylight Threshold	About .2-5 fc for disabled
Sensor Time Delay	5s, 30s, 1min, 5min, 10min, 20min, 30min
Sensor Cut-Off Period	0s, 10s, 1min, 5min, 10min, 30min, 1hr, Bi-Level
Sensor Cut-Off Dimming level	10, 20, 30, 50%
Sensor Cut-Off Power	Less than 1W
Sensor Customizable Detection Area	10, 50, 75 or 100%
Sensor Max Detection Range	26 ft. diameter at 16 ft. mounting height
Sensor Max Mounting Height	16.4 feet
Sensor Principle	High Frequency
Sensor Microwave Frequency	5.8GHz +/- 75MHz
Sensor Microwave Power	<0.2mW
Sensor Relay	Zero-cross relay
Operating Temperature	-4 to 104°F -20 to 40°C
Sensor Operating Temperature	-4 to 140°F -20 to 60°C
Lifespan	50,000 Hours (Based on IES LM-80 results and TM-21 calculations)
Emits No UV Light	Yes
Dimmable	Yes (0-10V Dimming Only)
Damp Location Rated	Yes
DLC Listed	Yes Designed to meet DLC 5.1 requirements. DLC Product Code: S-4LATM2
UL Listed	Yes Suitable for damp locations
IC Rated	Suitable for direct contact with insulation
Chicago CCEA Plenum Compliant	Yes
RoHS Compliant	Yes
Mercury Free	Yes
Limited Warranty	5 Year Limited Covers light output, driver performance and paint finish.
Country of Origin	Cambodia
Trade Agreements Act Compliant	Yes
UPC	192552014281

Dimensions

Spec Sheet: T34FA-2X4/MVS Spec Sheet

Instructions: Installation Instructions