
4 Foot T8 LED

15 Watts

2,100 Lumens

6700K
(Brightest White)

83 CRI

Damp Locations

Not Dimmable

7 Year Warranty
Features
Operates 2 Ways
- Direct T8 LED tube fluorescent light replacement. Works with most existing T8 Electronic ballasts. No need to rewire the LED tube light fixture.
- Disconnect the ballast and connect directly to AC.
Daylight simulating LED
Great for color-matching and emits less UV than fluorescent lamps.
Instant On
Reaches full brightness instantly once you plug it in! No warm up time.
Energy Savings
The 4 foot LED tube only uses 15 watts.
Replace | Watts | Savings |
F40T12 | 40 Watts | 25 Watts |
F34T12 | 34 Watts | 19 Watts |
F32T8 | 32 Watts | 17 Watts |
F30T8 | 30 Watts | 15 Watts |
F28T8 | 28 Watts | 13 Watts |
F25T8 | 25 Watts | 10 Watts |
Wiring
Direct AC

Bypass Instant Start Ballast

Bypass Rapid Start Ballast

Notes
- Suitable for damp locations.
- Not for use with dimmers.
- Direct Replacement for the following 4-foot lamps only: F32T8/F30T8/F28T8/F25T8
- Ballast bypass to replace F40T12 and F34T12 lamps.
- Caution - the risk of fire. Use only in place of fluorescent lamps specified.
- Caution - if the lamp or luminaire exhibits undesirable operation (buzzing, flickering, etc.) immediately turn off the power, remove the lamp from luminaire, and contact the manufacturer.
- Caution - Risk of fire - do not install this lamp in the pre-heat luminaire.
- Turn off power before installation.
Specifications
Length: | 4 Feet |
Watts: | 15 |
Kelvin: | 6700 |
CRI: | 83 |
Base: | Med Bi-Pin |
Initial Lumens: | 2,100 |
Rated Life: | 50,000 Hours |
LED Warranty: | 7 Years |
Compatible Ballasts: | Most electronic T8 ballasts |
Direct Wire Input Voltage: | 100-277 AC, 0.2A 50-60H |
Spec Sheet:
HH9360 Spec Sheet